Evita las líneas eléctricas

Avoid deploying your FieldKit near power lines or other utilities.

La placa de cableado debe ir hacia abajo

Avoid installing your FieldKit with the cable plate facing any direction other than down to avoid water intrusion.

Cierra bien los broches del FieldKit

Make certain to firmly close the clasps of your case after working on the internal components of the FieldKit.

Adquiere un adaptador MicroSD

You may want to invest in a microSD-to-SD adapter cable to make servicing your microSD card easier, and to make it easier to see the card if you drop it.

Revisa la conexión de la batería

Check any batteries to make certain that the connector is correctly polarized: red is (+) and black is (-).

Sujeta la estación de forma segura

If deploying your FieldKit in a tree, on a post, or anywhere more than two meters above the ground, make certain that your attachment points are secure.

Protege los cables de los sensores

Make certain to use some sort of protection (like cable loom tubing, cable armor, or a grease-and-cayenne-pepper combination) on your sensor cables so that they won’t be chewed on by animals.

Check out our Care Instructions for more details.

Usa un casco

If deploying your FieldKit above head level, please wear a helmet.

Revisa la exposición del voltaje

If running power to your FieldKit outside, make certain the low voltage DC part of the power run is the one exposed to the elements, not the wall power (high voltage AC) side.

Obtén los permisos para la instalación

Always get permission to deploy your FieldKit in any particular environment.

Protege las baterías

Do not short or puncture the battery pack.

No viajes solo(a)

Tell someone where you’re going, especially if it’s going to be remote.

Prepárate para el entorno

Respect nature—beware of rough terrain or dangerous animals.